CORNER PROFILE

It is a supplementary element used to enhance impact strength in plate corner junctions in exterior wall applications, and made of hot dip galvanized steels using cold forming method.

Thickness 0,5 mm
Length 3000 mm
Packaging 25 pcs/bundle
Steel Type DX51D (complies with EN 10346)
Galvanized Thickness Z100, Z140, Z275
Fire Resistance Rating A1 Sınıfı
Yield Strength ≥140 N/mm2

The length is 3000 mm as standard. It is possible to manufacture between 2000 - 8000 mm depending your project and demand.
SIZES


a: 30 mm, b: 30 mm

PACKAGING

25 pcs / bundle

Pallet quantity varies varies according to the thickness of the product.
Exterior Wall Systems
  • Can be manufactured at any length between 2000 - 8000 mm.
  • If used together with supplementary UMS products, can be supported with static report by UMS upon request.
Profile pallets should be covered with a coat before shipment, their contact with rain or snow water etc. should be prevented.

Contact of profiles with water should be prevented in storing areas, and they should be stored in closed environment.

If storing will be outside a closed environment, profile pallets should be covered with a coat before shipment, their contact with rain or snow water etc. should be prevented.
Pallet based products should be stored in stock area so as to be on top of each other up to a maximum height of 3 m.

If the pallets are to be put on top of each other, pallets should be kept in stock so that pallet legs are in alignment.
During recycling of the profile, if it contains glass wool and/or plaster board residues, it should be treated as construction and destruction residue.