GALVANIZED AND PAINTED GALVANIZED 27/200 TRAPEZOIDAL PLATE AND RIDGE

Trapezoidal plate and ridge made of galvanized or painted galvanized hot dip sheet.

Manufactured in 27/200 mm section form with 5 or 6 corrugations.

Net application width of 27/200 mm trapezoid with 5 corrugations: 800 mm

Net application width of 27/200 mm trapezoid with 6 corrugations: 1000 mm

Technical Drawing




 
Hot Dip Galvanized 27/200 Trapezoidal Plate and Ridge Technical Specifications:
Thickness 0,30 – 1,20 mm
Width 860 - 1040 mm
Length 100 – 12000 mm
Coating Thickness (total of two surfaces) 50 – 350 gr/m2
Steel Type Steel Type: Steels Suitable for Cold Forming (DX51D+Z, DX52D+Z, DX53D+Z, DX54D+Z, DX56D+Z) Non-Alloy Structural Steels (S220 GD+Z, S250 GD+Z, S280 GD+Z, S320 GD+Z, S350 GD+Z)
Paint Type Polyester, Pvdf, Plastisol, PVC
Color Options Can be produced in all RAL codes.

Hot Dip Painted Galvanized 27/200 Trapezoidal Plate and Ridge Technical Specifications:
Thickness 0,30 – 1,20 mm
Width 860 - 1040 mm
Length 100 – 13000 mm
Coating Thickness (total of two surfaces) 50 – 350 gr/m2
Steel Type Steel Type: Steels Suitable for Cold Forming (DX51D+Z, DX52D+Z, DX53D+Z, DX54D+Z, DX56D+Z) Non-Alloy Structural Steels (S220 GD+Z, S250 GD+Z, S280 GD+Z, S320 GD+Z, S350 GD+Z)
Paint Type Polyester, Pvdf, Plastisol, PVC
Color Options
Can be produced in all RAL codes.
 

Distributed Loads that 27/200 Form Trapezoidal Plates can Sustain (kg/m2)
Purlin Weight (m) 0.30 0.35 0.40 0.45 0.50 0.55 0.65 0.75 0.85 0.95 1.05 1.25
1.00 355 415 473 533 593 652 770 889 1009 1127 1187 1425
1.10 294 343 391 440 490 538 637 734 833 931 981 1177
1.20 246 288 329 370 411 452 536 617 701 782 824 989
1.40 181 211 241 272 302 332 393 453 515 575 605 726
1.50 158 185 211 237 264 290 343 396 449 501 528 634
1.80 110 128 146 165 183 201 238 275 312 348 367 440
2.00 89 104 119 134 149 163 193 223 252 282 297 356
2.20 73 86 98 110 123 135 160 184 209 233 245 295
2.40 62 72 82 93 103 113 134 155 175 196 206 248
2.50 57 67 76 86 95 104 124 142 162 181 190 228
2.80 45 53 61 68 76 83 98 114 129 144 152 182
3.00 39 46 53 59 66 72 86 99 112 125 132 158

 

Allowable Stress = 1200 kg/cm2 calculations are based on continuous beam shape. There is no individual load to a single point.

Weight of 27/20 Form Trapezoidal Plates
Galvanized Sheet Thickness (mm) 0.30 0.35 0.40 0.45 0.50 0.60 0.70 0.80 0.90 1.00 1.20
1 m-Length Weight (kg/m) 2.36 2.75 3.14 3.53 3.93 4.71 5.50 6.28 7.07 7.85 9.42
Usage Area Weight (kg/m2) 2.94 3.43 3.93 4.42 4.91 5.89 6.87 7.85 8.83 9.81 11.78
 
Hot Dip Galvanized 27/200 Trapezoidal Plate and Ridge Technical Specifications:
Thickness 0,30 – 1,20 mm
Width 860 - 1040 mm
Length 100 – 12000 mm
Coating Thickness (total of two surfaces) 50 – 350 gr/m2
Steel Type Steel Type: Steels Suitable for Cold Forming (DX51D+Z, DX52D+Z, DX53D+Z, DX54D+Z, DX56D+Z) Non-Alloy Structural Steels (S220 GD+Z, S250 GD+Z, S280 GD+Z, S320 GD+Z, S350 GD+Z)
Paint Type Polyester, Pvdf, Plastisol, PVC
Color Options Can be produced in all RAL codes.

Hot Dip Painted Galvanized 27/200 Trapezoidal Plate and Ridge Technical Specifications:
Thickness 0,30 – 1,20 mm
Width 860 - 1040 mm
Length 100 – 13000 mm
Coating Thickness (total of two surfaces) 50 – 350 gr/m2
Steel Type Steel Type: Steels Suitable for Cold Forming (DX51D+Z, DX52D+Z, DX53D+Z, DX54D+Z, DX56D+Z) Non-Alloy Structural Steels (S220 GD+Z, S250 GD+Z, S280 GD+Z, S320 GD+Z, S350 GD+Z)
Paint Type Polyester, Pvdf, Plastisol, PVC
Color Options
Can be produced in all RAL codes.
 

Distributed Loads that 27/200 Form Trapezoidal Plates can Sustain (kg/m2)
Purlin Weight (m) 0.30 0.35 0.40 0.45 0.50 0.55 0.65 0.75 0.85 0.95 1.05 1.25
1.00 355 415 473 533 593 652 770 889 1009 1127 1187 1425
1.10 294 343 391 440 490 538 637 734 833 931 981 1177
1.20 246 288 329 370 411 452 536 617 701 782 824 989
1.40 181 211 241 272 302 332 393 453 515 575 605 726
1.50 158 185 211 237 264 290 343 396 449 501 528 634
1.80 110 128 146 165 183 201 238 275 312 348 367 440
2.00 89 104 119 134 149 163 193 223 252 282 297 356
2.20 73 86 98 110 123 135 160 184 209 233 245 295
2.40 62 72 82 93 103 113 134 155 175 196 206 248
2.50 57 67 76 86 95 104 124 142 162 181 190 228
2.80 45 53 61 68 76 83 98 114 129 144 152 182
3.00 39 46 53 59 66 72 86 99 112 125 132 158

 

Allowable Stress = 1200 kg/cm2 calculations are based on continuous beam shape. There is no individual load to a single point.

Weight of 27/20 Form Trapezoidal Plates
Galvanized Sheet Thickness (mm) 0.30 0.35 0.40 0.45 0.50 0.60 0.70 0.80 0.90 1.00 1.20
1 m-Length Weight (kg/m) 2.36 2.75 3.14 3.53 3.93 4.71 5.50 6.28 7.07 7.85 9.42
Usage Area Weight (kg/m2) 2.94 3.43 3.93 4.42 4.91 5.89 6.87 7.85 8.83 9.81 11.78
 
Hot Dip Galvanized 27/200 Trapezoidal Plate and Ridge Technical Specifications:
Thickness 0,30 – 1,20 mm
Width 860 - 1040 mm
Length 100 – 12000 mm
Coating Thickness (total of two surfaces) 50 – 350 gr/m2
Steel Type Steel Type: Steels Suitable for Cold Forming (DX51D+Z, DX52D+Z, DX53D+Z, DX54D+Z, DX56D+Z) Non-Alloy Structural Steels (S220 GD+Z, S250 GD+Z, S280 GD+Z, S320 GD+Z, S350 GD+Z)
Paint Type Polyester, Pvdf, Plastisol, PVC
Color Options Can be produced in all RAL codes.

Hot Dip Painted Galvanized 27/200 Trapezoidal Plate and Ridge Technical Specifications:
Thickness 0,30 – 1,20 mm
Width 860 - 1040 mm
Length 100 – 12000 mm
Coating Thickness (total of two surfaces) 50 – 350 gr/m2
Steel Type Steel Type: Steels Suitable for Cold Forming (DX51D+Z, DX52D+Z, DX53D+Z, DX54D+Z, DX56D+Z) Non-Alloy Structural Steels (S220 GD+Z, S250 GD+Z, S280 GD+Z, S320 GD+Z, S350 GD+Z)
Paint Type Polyester, Pvdf, Plastisol, PVC
Color Options
Can be produced in all RAL codes.
 

Distributed Loads that 27/200 Form Trapezoidal Plates can Sustain (kg/m2)
Purlin Weight (m) 0.30 0.35 0.40 0.45 0.50 0.55 0.65 0.75 0.85 0.95 1.05 1.25
1.00 355 415 473 533 593 652 770 889 1009 1127 1187 1425
1.10 294 343 391 440 490 538 637 734 833 931 981 1177
1.20 246 288 329 370 411 452 536 617 701 782 824 989
1.40 181 211 241 272 302 332 393 453 515 575 605 726
1.50 158 185 211 237 264 290 343 396 449 501 528 634
1.80 110 128 146 165 183 201 238 275 312 348 367 440
2.00 89 104 119 134 149 163 193 223 252 282 297 356
2.20 73 86 98 110 123 135 160 184 209 233 245 295
2.40 62 72 82 93 103 113 134 155 175 196 206 248
2.50 57 67 76 86 95 104 124 142 162 181 190 228
2.80 45 53 61 68 76 83 98 114 129 144 152 182
3.00 39 46 53 59 66 72 86 99 112 125 132 158

 

Allowable Stress = 1200 kg/cm2 calculations are based on continuous beam shape. There is no individual load to a single point.

Weight of 27/20 Form Trapezoidal Plates
Galvanized Sheet Thickness (mm) 0.30 0.35 0.40 0.45 0.50 0.60 0.70 0.80 0.90 1.00 1.20
1 m-Length Weight (kg/m) 2.36 2.75 3.14 3.53 3.93 4.71 5.50 6.28 7.07 7.85 9.42
Usage Area Weight (kg/m2) 2.94 3.43 3.93 4.42 4.91 5.89 6.87 7.85 8.83 9.81 11.78
 
  • Profile pallets should be covered with a coat before shipment, their contact with rain or snow water etc. should be prevented.
  • Contact of profiles with water should be prevented in storing areas, and they should be stored in closed environment.
  • If storing will be outside a closed environment, profile pallets should be covered with a coat before shipment, their contact with rain or snow water etc. should be prevented.
  • Pallet based products should be stored in stock area so as to be on top of each other up to a maximum height of 3 m.
  • If the pallets are to be put on top of each other, pallets should be kept in stock so that pallet legs are in alignment.
  • During recycling of the profile, if it contains glass wool and/or plaster board residues, it should be treated as construction and destruction residue. Otherwise, it should be classified as metal waste.