GALVANIZED AND PAINTED GALVANIZED 18/76.2 CORRUGATED PLATE

Corrugated plate made of galvanized or painted galvanized hot dip sheet.

It is the type of galvanized and painted galvanized sheet roll shaped in sinusoidal form with 18/76.2 section.

Net application width is 800 mm.

Hot Dip Galvanized 18/76.2 Corrugated Plate Technical Specifications:
Thickness 0,30 – 1,20 mm
Width 875 mm
Length 100 – 13000 mm
Coating Thickness (total of two surfaces) 50 – 350 gr/m2
Steel Type Steel Type: Steels Suitable for Cold Forming (DX51D+Z, DX52D+Z, DX53D+Z, DX54D+Z, DX56D+Z) Non-Alloy Structural Steels (S220 GD+Z, S250 GD+Z, S280 GD+Z, S320 GD+Z, S350 GD+Z)

Hot Dip Painted Galvanized 18/76.2 Corrugated Plate Technical Specifications:
Thickness 0,30 – 1,20 mm
Width 875 mm
Length 100 – 12000 mm
Coating Thickness (total of two surfaces) 50 – 350 gr/m2
Steel Type Steel Type: Steels Suitable for Cold Forming (DX51D+Z, DX52D+Z, DX53D+Z, DX54D+Z, DX56D+Z) Non-Alloy Structural Steels (S220 GD+Z, S250 GD+Z, S280 GD+Z, S320 GD+Z, S350 GD+Z)
Paint Type Polyester, Pvdf, Plastisol, PVC
Color Options Can be produced in all RAL codes.

Hot Dip Painted 18/76.2 Corrugated Plate Weight:  
Galvanized Sheet Thickness (mm) 0.30 0.35 0.40 0.45 0.50 0.60 0.70 0.80 0.90 1.00 1.20
1 m-Length Weight (kg/m) 2.36 2.75 3.14 3.53 3.93 4.71 5.50 6.28 7.07 7.85 9.42
Usage Area Weight (kg/m2) 2.80 3.27 3.74 4.21 4.67 5.61 6.54 7.48 8.41 9.35 11.21

Distributed Loads that Hot Dip Painted 18/76.2 Corrugated Plates can Sustain (kg/m2)
  Plate Thickness
Purlin Spacing 0.30 0.35 0.40 0.45 0.50 0.55 0.65 0.75 0.85 0.95 1.05 1.25
1.00 208 243 278 312 347 382 451 520 590 659 693 833
1.10 172 200 230 258 287 315 373 430 487 545 574 688
1.20 144 169 193 217 241 265 313 361 410 458 482 578
1.40 106 124 142 159 177 195 230 266 301 336 354 425
1.50 92 108 123 139 154 170 200 231 262 293 308 370
1.80 34 75 86 96 107 118 139 161 182 203 214 257
2.00 53 61 69 78 87 95 113 130 148 165 173 208
2.20 43 50 57 65 72 79 93 108 122 136 143 172
2.40 36 42 48 54 60 66 78 90 102 114 120 145
2.50 33 39 44 50 56 61 72 83 94 106 111 133
2.80 26 31 35 40 44 49 57 66 75 85 89 106
3.00 23 27 31 35 39 42 50 58 66 75 77 93
 
  • Profile pallets should be covered with a coat before shipment, their contact with rain or snow water etc. should be prevented.
  • Contact of profiles with water should be prevented in storing areas, and they should be stored in closed environment.
  • If storing will be outside a closed environment, profile pallets should be covered with a coat before shipment, their contact with rain or snow water etc. should be prevented.
  • Pallet based products should be stored in stock area so as to be on top of each other up to a maximum height of 3 m.
  • If the pallets are to be put on top of each other, pallets should be kept in stock so that pallet legs are in alignment.
  • During recycling of the profile, if it contains glass wool and/or plaster board residues, it should be treated as construction and destruction residue. Otherwise, it should be classified as metal waste.